/workspace/jkrauss/Test_6/Test_6.kicad_sch Date1 Eeschema 9.0.7+1 Assembly Name ASSEMBLY NOTES (UNLESS OTHERWISE SPECIFIED) 1) DO NOT POPULATE COMPONENTS ARE MARKED WITH A RED CROSS 2) DO NOT POPULATE COMPONENTS ARE NOT PRESENT IN THE BOM 3) IF CONFLICTING INFORMATION IS FOUND BETWEEN THE ASSEMBLY FILE AND BOM, BOM SHOULD BE USED AS THE MAIN SOURCE. 4) DOT IDENTIFIES PIN #1 LOCATION AND DEVICE ORIENTATION WHEN VIEWED FROM THE TOP. A99-9000 1 Asymworks, LLC JPK P99-9000 S99-9000 PCB Assembly, Assembly Name PCB, Assembly Name Schematic, Assembly Name FABRICATION NOTES (UNLESS OTHERWISE SPECIFIED) 1) FABRICATE PER IPC-6012A CLASS 2. 2) OUTLINE DEFINED IN SEPARATE GERBER FILE WITH "Edge_Cuts.GBR" SUFFIX. 3) SEE SEPARATE DRILL FILES WITH ".DRL" SUFFIX FOR HOLE LOCATIONS. SELECTED HOLE LOCATIONS SHOWN ON THIS DRAWING FOR REFERENCE ONLY. 4) SURFACE FINISH: ENIG 5) SOLDERMASK ON BOTH SIDES OF THE BOARD SHALL BE LPI, COLOR GREEN. 6) SILK SCREEN LEGEND TO BE APPLIED PER LAYER STACKUP USING WHITE NON-CONDUCTIVE EPOXY INK. 7) ALL VIAS ARE TENTED ON BOTH SIDES UNLESS SOLDERMASK OPENED IN GERBER. 8) RESERVED 9) PCB MATERIAL REQUIREMENTS: A. FLAMMABILITY RATING MUST MEET OR EXCEED UL94V-0 REQUIREMENTS. B. Tg 135 C OR EQUIVALENT. 10) DESIGN GEOMETRY MINIMUM FEATURE SIZES: BOARD SIZE N/A × N/A mm BOARD THICKNESS 1.647 mm TRACE WIDTH N/A mm TRACE TO TRACE 0.200 mm MIN. HOLE (PTH) N/A mm MIN. HOLE (NPTH) N/A mm ANNULAR RING N/A mm COPPER TO HOLE 0.250 mm COPPER TO EDGE 0.500 mm HOLE TO HOLE 0.250 mm 11) ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE SPECIFIED. 12) FOR REFERENCE ONLY THE STACKUP CORRESPONDS TO JLCPCB STACKUP JLC04161H-7628. af84182 6f934d1 af84182 /jkrauss/Test_4 P99 2026-03-10 DRAFT NO_TAG+ (Unreleased) 1:1 Unless otherwise specified, components Values are in ohms, µF, and µH. Cover Page Project ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... ...................................... TEMPLATE Asymworks, LLC NO_TAG+ (Unreleased) Test_6.kicad_sch