55 lines
1.4 KiB
Plaintext
55 lines
1.4 KiB
Plaintext
FABRICATION NOTES (UNLESS OTHERWISE SPECIFIED)
|
||
|
||
1) FABRICATE PER IPC-6012A CLASS 2.
|
||
|
||
2) OUTLINE DEFINED IN SEPARATE GERBER FILE WITH
|
||
"Edge_Cuts.GBR" SUFFIX.
|
||
|
||
3) SEE SEPARATE DRILL FILES WITH ".DRL" SUFFIX
|
||
FOR HOLE LOCATIONS.
|
||
|
||
SELECTED HOLE LOCATIONS SHOWN ON THIS DRAWING
|
||
FOR REFERENCE ONLY.
|
||
|
||
4) SURFACE FINISH: ${pcb_finish_cap}
|
||
|
||
5) SOLDERMASK ON BOTH SIDES OF THE BOARD SHALL
|
||
BE LPI, COLOR ${solder_mask_color_text_cap}.
|
||
|
||
6) SILK SCREEN LEGEND TO BE APPLIED PER LAYER
|
||
STACKUP USING ${silk_screen_color_text_cap} NON-CONDUCTIVE EPOXY INK.
|
||
|
||
7) ALL VIAS ARE TENTED ON BOTH SIDES UNLESS
|
||
SOLDERMASK OPENED IN GERBER.
|
||
|
||
8) RESERVED
|
||
|
||
9) PCB MATERIAL REQUIREMENTS:
|
||
|
||
A. FLAMMABILITY RATING MUST MEET OR EXCEED
|
||
UL94V-0 REQUIREMENTS.
|
||
B. Tg 135 C OR EQUIVALENT.
|
||
|
||
10) DESIGN GEOMETRY MINIMUM FEATURE SIZES:
|
||
|
||
BOARD SIZE ${bb_w_mm} × ${bb_h_mm} mm
|
||
BOARD THICKNESS ${thickness_mm} mm
|
||
TRACE WIDTH ${track_mm} mm
|
||
TRACE TO TRACE ${clearance_mm} mm
|
||
MIN. HOLE (PTH) ${drill_pth_real_mm} mm
|
||
MIN. HOLE (NPTH) ${drill_npth_real_mm} mm
|
||
ANNULAR RING ${oar_mm} mm
|
||
COPPER TO HOLE ${c2h_mm} mm
|
||
COPPER TO EDGE ${c2e_mm} mm
|
||
HOLE TO HOLE ${h2h_mm} mm
|
||
|
||
11) ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE
|
||
SPECIFIED.
|
||
#?stackup and impedance_controlled
|
||
|
||
#?stackup and impedance_controlled
|
||
12) REFER TO IMPEDANCE TABLE FOR IMPEDANCE CONTROL REQUIREMENTS.
|
||
#?stackup and impedance_controlled
|
||
|
||
#?stackup and impedance_controlled
|
||
13) CONFIRM SPACE WIDTHS AND SPACINGS. |