[bot]: Update Outputs

mfg/fab/Asymworks_Template-fabrication_notes.txt

@@ -0,0 +1,50 @@
+FABRICATION NOTES (UNLESS OTHERWISE SPECIFIED)
+
+1)	FABRICATE PER IPC-6012A CLASS 2.
+
+2)	OUTLINE DEFINED IN SEPARATE GERBER FILE WITH
+	"Edge_Cuts.GBR" SUFFIX.
+
+3)	SEE SEPARATE DRILL FILES WITH ".DRL" SUFFIX 
+	FOR HOLE LOCATIONS.
+
+	SELECTED HOLE LOCATIONS SHOWN ON THIS DRAWING 
+	FOR REFERENCE ONLY.
+
+4)	SURFACE FINISH: ENIG
+
+5)	SOLDERMASK ON BOTH SIDES OF THE BOARD SHALL 
+	BE LPI, COLOR GREEN.
+
+6)	SILK SCREEN LEGEND TO BE APPLIED PER LAYER 
+	STACKUP USING WHITE NON-CONDUCTIVE EPOXY INK.
+
+7)	ALL VIAS ARE TENTED ON BOTH SIDES UNLESS 
+	SOLDERMASK OPENED IN GERBER.
+
+8)	RESERVED
+
+9)	PCB MATERIAL REQUIREMENTS:
+
+	A.	FLAMMABILITY RATING MUST MEET OR EXCEED 
+		UL94V-0 REQUIREMENTS.
+	B.	Tg 135 C OR EQUIVALENT.
+
+10)	DESIGN GEOMETRY MINIMUM FEATURE SIZES:
+
+	BOARD SIZE				N/A × N/A mm
+	BOARD THICKNESS		1.647 mm
+	TRACE WIDTH			N/A mm
+	TRACE TO TRACE		0.200 mm
+	MIN. HOLE (PTH)			N/A mm
+	MIN. HOLE (NPTH)		N/A mm
+	ANNULAR RING			N/A mm
+	COPPER TO HOLE		0.250 mm
+	COPPER TO EDGE		0.500 mm
+	HOLE TO HOLE			0.250 mm
+
+11)	ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE
+	SPECIFIED.
+
+12)	FOR REFERENCE ONLY THE STACKUP CORRESPONDS TO JLCPCB
+	STACKUP JLC04161H-7628.